Raleigh RM4,RM5,RM6,RM7,RM8,RM9,RM11,RM12 Moped Novi Replica Internal Low Voltage Tension Coil for Ignition 9mm
Replica NOVI PB Coil to fit inside the Magento Flywheel System.
Not Original, but a good quality replacement.
Fixing holes are 4mm and 8mm
The red internal coil was used often for the electrical system for the ignition to feed the High Tension Coil on the frame.
IMPORTANT INFORMATION: These coils are a slightly different size to the originals. The gaps in the coil slightly touch the Magento Flywheel Cover. The coils will need to be shortened by a few tenths of a millimeter so that it all fits. Please be aware of this before ordering.
Suitable for Many Mopeds in particular AV7 / AV10 engines on the:-
- RM4,RM5,RM6,RM7,RM8,RM9,RM11,RM12 Raleigh Mopeds
For more quality moped parts please use the search boxes or contact us
The thickness of the coil is 9mm. Some originals were this size and some were thicker at 14mm. We also do the thicker coil ref 21947. If replacing a thicker coil with this 9mm thickness coil you will also need to cut down the fixing points or use spacers.