Heavy Duty Moped Drive Chain for Honda NC50, PA50, PC50 and most models
Excellent Quality Universal Drive Chain to fit all Mopeds
Specifications
· Triple SSS TKR High quality heavy duty chain
· Chain Size =415
· Pitch = ½ Inch (The equidistance between the centre of the pins)
· Inner Roller Width = 3/16 Inch
· Number of Pins = 120*
· Includes split link which can be fitted depending upon the number of chain links required (see below)
Suitability
Mopeds had chains fitted with the above spec. The only difference is the number of links. This chain is supplied with 120 pins. Links can be removed using a link extractor to the number you require.
This is a universal type chain suitable for most Autocycles, Mopeds and Scooters (Not Motorcycles) including the following manufacturers of mopeds:-
· Autovap
· Batavus
· Derbi
· Garelli
· Hercules
· Honda PC50 / PF50 / Camino etc
· Jawa
· Malaguti
· Mobylette / Motobecane all moped models
· Norman Gadabout / Nippy
· NSU
· Peugeot
· Phillips
· Piaggio
· Puch Maxi, Magnum etc
· Raleigh RM4/5/6/7/8/9/11/12
· Tomos
· Yamaha FS1E
· Zundapp
*Please note in the unusual circumstance you require more than 120 links you may need to buy two chains.
Additional Information
The chain is supplied with a box with instruction which recommends that when fitting new chains if possible replace old or worn sprockets. Chains should be fitted in accordance with the original equipment manufacturers specification by a qualified mechanic.
Often you will not need all the links so keep the extra links when you split the chain down, then if for any reason your chain becomes twisted you wll have spare replacement links. Some mopeds were fitted with different sprockets and cogs to originally specified so we like to supply a generous number of links rather than split the chains and supply less.
For more information please do not hesitate to contact me before ordering
Thank you for looking, I also have many other parts for sale.
Pictures are for illustration only, outer packaging may vary.