A New pair of replacement non original handlebar grips in grey.
- 1 grip = 7/8 inch to fit the handlebar
- 1 grip = 1 inch to fit the throttle.The size is just under 1 inch to provide a tight fit when stretched onto the throttle. This is because the grip should not slip when the throttle is engaged
- Each grip is approximately 100 mm long to suit mopeds.
Please note that during fitting it was also common practice to use some glue to assist in a tight fit.
Not original, but a very close good quality match available to fit the following mopeds
Fits many of the Mobylette range of mopeds including:-
Mobylette AV42, AV44, AV48, AV89
Mobylette Series 40
Mobylette Series 50
and may also fit other mopeds
